SWEPCO 729 Premium Flushing Oil

Description

SWEPCO 729 Premium Flushing Oil is a light mineral oil especially formulated for purging oil systems before switching to a SWEPCO High Performance Lubricant.

Use of SWEPCO 729 helps insure optimum performance from any SWEPCO Compressor Oil, Transmission Fluid, Hydraulic Fluid, Industrial Oil, Gear Oil or Engine Oil.

Simply draining old lubricants does not entirely remove the old lubricant from the system. Intricate oil passages, reservoirs, fluid lines, cylinders, accumulators, pumps, separators, coolers and other oil system components can retain residual oil that can contaminate new lubricants.

A brief flushing cycle with SWEPCO 729 insures more complete elimination of old lubricants from the entire system. This is especially critical in compressor changeovers. It also removes loose deposits so they will not have a negative effect on compressor efficiency or operation.

If transmissions, hydraulic systems, engines or gear boxes are known to be dirty, have high miles or hours or have demonstrated performance issues, flushing is also recommended for them before changing to SWEPCO Lubricants.

Finally, certain synthetic chemistries such as glycols, silicones and certain esters can have an adverse effect on petroleum base oils. Flushing with SWEPCO 729 is also recommended for any component being switched from an alternate brand lubricant.

Highly Recommended For:

• ALL rotary and reciprocating compressor changeovers
• Any component with high mileage, high hours, where system is known to be dirty or that has demonstrated performance issues

SWEPCO 729 Premium Flushing Oil

• Helps ensure optimum performance of SWEPCO Lubricants
• Recommended for flushing compressors, transmissions, hydraulic systems, gearboxes, differentials, final drives and engines.

For example, if the system cannot run without a load, an interesting alternative may be SWEPCO 728 In-Service System Cleaner.

• Simple, safe, aggressive system cleaning without shutting down equipment or slowing production
• Use just prior to routine oil changes or before flushing when changing oil brands or types
• Recommended for use in hydraulic systems, rotary screw and reciprocating compressors, industrial gear boxes, differentials, final drives and engines

Additional information

• Industrial Equipment
• Manufacturing

• The new oil to be used will be able to perform optimally
• No negative effects from any residual old oil
• Cleaning up of loose deposits
• Increased future operational reliability

• ALL rotary and reciprocating compressor changeovers
• Any component that has been run on a synthetic oil
• Any component with high mileage, high hours, that is known to be dirty or that has demonstrated performance issue

Would you like more information about this product? Contact us at info@stratson.nl.

We will send you by e-mail, for example:

• •Case studies,
• Technical data sheets &
• Material Safety Data Sheets.

Let us know by email what information you would like to receive.

Or download TDS of MSDS under Technical Data tab.